Description: Loctite® 3163™ Hysol® Epoxy Hardener, Excellent Adhesion is one part of a two part epoxy system to be used with a variety of Loctite® Hysol® datasheets360 resins. DOES NOT GUARANTEE the information on this page is the most updated information available from the manufacturer, there are times when they release an update we. EPOXI- PATCH® Tube Kits have been designed so that datasheets360 squeezing EQUAL LENGTH BEADS of Part A & Part B hysol will give the proper. 200 mL Cartridge. Henkel Loctite Hysol 9460 Epoxy Adhesive Gray 5 lb Kit Description Henkel Loctite Hysol 9460 is a two component high viscosity, impact resistant epoxy adhesive datasheets360 formulated to give very high peel shear strength. When mixing by hand combine Part A ( Resin) , Part B ( Hardener) in the correct ratio , mix thoroughly until the color consistency are uniform. datasheets360 Loctite 9460 Technical Data Sheet PLEASE ALLOW A MOMENT datasheets360 TO LOAD Our goal is to be a technical resource for our customers to 9460 provide accurate current information. Henkel Loctite Hysol 9460 is a two component impact resistant epoxy adhesive formulated to give very high peel , high viscosity shear hysol strength.
United States: Charlotte ( Nc) Nagaoka hysol Guinea- Bissau; Czestochowa, Japan; Cachoeiro De Itapemirim, Brazil; Bissau Poland. TDS LOCTITE® hysol Hysol® 9460™, December- Directions datasheets360 for use Mixing: 1. Hysol 9460 datasheets360. The system is formulated for high adhesion potting hysol and encapsulating applications. This two- part adhesive is hysol formulated to give very high peel strength coupled with excellent shear strength.
LOCTITE® Hysol® 9460™ can also be fully cured with heat such as 6 to 8 hours at a maximum temperature of 149 ° C. After 24 hours, approximately 90% of full cure properties are attained at room temperature. Preheated Loctite 9460 Hysol Epoxy ( McMaster- Carr, NJ) was poured into the mold at depths of 3- 10 mm and allowed to cure overnight. ADVANCED WORKER PROTECTION SYSTEM Hysol epoxy was selected to glue the hubs in place due to its strength and durability at cryogenic temperatures.
hysol 9460 datasheets360
Henkel Loctite 9460 Hysol Epoxy Structural Adhesive, Non- Sag For bonding dissimilar substrates, choose Henkel Loctite 9460 Hysol Epoxy Adhesive from SkyGeek. Loctite 9460 is a non- sagging, thixotropic, modified, two- component epoxy adhesive that is specially formulated for ease of use as well for a good balance of properties. Technical Data Sheet LOCTITE® EA 9460™ Known as LOCTITE® Hysol® 9460™ December- PRODUCT DESCRIPTION LOCTITE® EA 9460™ provides the following product characteristics:.